Splicers T-66
The T-66 mass fusion splicer can be used for splicing primary coated and secondary coated single fibres, and fibre ribbons from 2 to 12 cores.
Fibre holders
| Single |
2 core |
4 core |
5 core |
6 core |
8 core |
10 core |
12 core |
| FHS-25 |
FHM-2 |
FHM-4 |
FHM-5 |
FHM-6 |
FHM-8 |
FHM-10 |
FHM-12 |
| FHS-09 |
FHM-2A |
FHM-4A |
------ |
FHM-6A |
------ |
------ |
------ |
A comprehensive range of fibre holders is available for the T-66 for splicing single fibres and fibre ribbons up to 12 cores. The FHM-2A, FHM-4A and FHM-6A holders include a 3M Trizact® coating to increase their grip on the ribbon, and reduce problems caused by ribbons slipping through the holder.
With a strong Sumitomo family resemblance to the T-39 core aligning single fibre splicer. The T-66 combines fast splice times and long battery life with dual independent heat shrink ovens to improve throughput and productivity.
The T-66 uses our Full Focus with Equal Size (FFES) imaging system, first introduced on the T-63 mass fusion splicer. FFES shows all fibres on screen with the same magnification and with the ribbon image orientation the same way round as the ribbon itself. This simplifies identification of fibres on the splicer and helps avoid confusion between splicer operator and OTDR operator when testing splices.
The T-66 brochure is available as a .pdf file download.
CLICK HERE TO DOWNLOAD BROCHURE
You will require Acrobat Reader to view the downloaded brochure.
If you do not have Acrobat Reader, you can download from the
link on this page.
Click here to download Acrobat Reader
|