The T-39, Sumitomo’s core aligning single fibre splicer was introduced in 2006. It is field proven with many thousand T-39s in use around the world. Sumitomo have been listening to customer requests for improvements and new options with the result that the T-39 family now has a new member, the T-39-LC.
Low power electronics to give long battery life. 200+ splices from a single charge of the BU-66L
T-39-LC with universal coating clamp, a solution to the “loose buffer problem”
Many customers need to splice loose buffer secondary coated fibre and protect the splice with a 60mm splice protection sleeve. Standard coating clamp designs often have problems gripping loose buffer secondary coated fibre. To prevent the loose buffer slipping over the fibre during splicing, the operator must strip the secondary coating back outside the coating clamp. The result is, the distance between the end of the secondary coating and the splice point is >20mm and a 60mm protection sleeve cannot seal the end of the loose buffer.
The T-39-LC introduces a new design of universal coating clamp. This clamp works with primary coated fibre and tight buffer secondary coated fibre in the normal way. But it also grips loose buffer fibre, offering a simple solution to “loose buffer problem” and allowing a “loose to loose” splice to be protected in a 60mm sleeve.
A cleaver support bracket is available to clip neatly on the side of the T-39, providing a convenient and secure location for a Sumitomo FCP-2x or FC-6x cleaver.
The monitor swings through 180° to give maximum flexibility of positioning the splicer at the work station.
The T-39 software is available in many languages, contact us for more information.
The T-39 brochure is available as a .pdf file download.
CLICK HERE TO DOWNLOAD BROCHURE
You will require Acrobat Reader to view the downloaded brochure.
If you do not have Acrobat Reader, you can download from the
link on this page.
Click here to download Acrobat Reader